Maintenance

Continuous Feed: 2 – 5 ppm BCP 1030

Slug Dose: 12 – 30 ppm BCP 1030

• Dose 1 to 3 times per week.
• Optimize the dosing and frequency of dosing based on quality control (QC) metrics.

Clean-Up

Slug Dose: 13 – 50 ppm BCP 1030

• Dose each day or until system performance measurements and visual inspection show satisfactory removal of organic deposits and system clean-up.

Super Slug Dose (Clean-up of heavily fouled systems): 50 ppm BCP 1030

• Dose at 1-2 hour intervals.
• Add high concentration dose (50 ppm) of BCP 1030 to penetrate and disperse
  organic deposits from the surfaces.
• After 1-2 hours, initiate an enhanced/manual blow down to remove released organic
  deposits & non-organic deposits.
• Repeat dose and enhanced/manual blow down steps until system quality control
  measurements indicate satisfactory clean up.